APW Wyott WK-1 Instructions d'exploitation

1 INSTALLATION AND OPERATING INSTRUCTIONS Gas Griddles MODELS: GGT-18i, -24i, -36i, -48i & MODELS: GGM-18i, -24i, -36i, 48i (US & Canad

10 If the temperature differential is large than 75ºF, there is probably a problem with your system. It may not be the thermostat. First make sure you

11 TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE Heat does not come on when thermostat is turned on. Thermostat is bad. Pilot burner not lit. Gas va

12 PARTS LISTS & EXPLODED VIEWS GGM GRIDDLES (EXPLODED VIEW)

13 GGM – PARTS LIST Item P/N Description Quan Item P/N Description Quan 1 218215-20 Weldment, Griddle GGM-18 1 24 2425400 Pan, Grease 18" Short D

14 GGT GRIDDLES (EXPLODED VIEW)

15 GGT – PARTS LIST Item P/N Description Quan Item P/N Description Quan 1 218219-60 Weldment, Griddle, GGT -18 1 30* 2300100 Bags, Poly 36x27x44 1 21

16 APW WYOTT EQUIPMENT LIMITED WARRANTY APW Wyott Foodservice Equipment Company warrants it's equipment against defects in materials and

2 CAUTION: These models are designed, built, and sold for commercial use. If these models are positioned so the general public ca

3 IMMEDIATELY INSPECT FOR SHIPPING DAMAGE All containers should be examined for damage before and during unloading. The freight carrier has assumed re

4 WARNING: Keep the appliance free & clear of all combustible substances. If gas odor is detected at any time, immediately shut unit down at the

5 Caution: DO NOT use an open flame to check for leaks. Check all gas piping for leaks with a soap and water solution before operating unit. THESE UNI

6 5. Turn the burner knobs to "HI". If the burner does not ignite, promptly open the pilot valve more. If the pilot flame appears larger th

7 CLEANING / MAINTENANCE CAUTION: Use only non-abrasive cleaners. Abrasive cleaners could scratch the finish of your unit, marring it’s appearance a

8 CONVERSION Instructions are for conversion from Natural Gas to Propane (L.P.) on all GGT & GGM models. The conversion should be done before con

9 GGT CALIBRATION PROBE LOCATION CALIBRATION PROCEDURE FOR GGT GRIDDLES Locate the reading positions Make sure the griddle surface is clean.